Rodaggio in corso…
Rodaggio in corso…
In anteprima assoluta le Wood Rook…
Sarà il mio prossimo progetto: 2 vie bass reflex in configurazione D’Appolito.
Continua qui.
Stay tuned!
I crossover definitivi delle Hatt TBS sono pronti! Piccolo aggiornamento qui.
Dopo tutto il tempo dedicato alla calibrazione del mio setup di misura, credo sia cosa buona e giusta pubblicare questa mini-guida di calibrazione di ARTA.
Leggi la guida qui.
Enjoy! 😉
Testing device | Transit USB Out 1/2 |
Sampling mode | 16-bit, 48 kHz |
Interface | MME |
Testing chain | External loopback (line-out – line-in) |
RMAA Version | 6.2.3 |
20 Hz – 20 kHz filter | ON |
Normalize amplitude | ON |
Level change | -5.6 dB / -5.6 dB |
Mono mode | OFF |
Calibration singal, Hz | 1000 |
Polarity | correct/correct |
Frequency response (from 40 Hz to 15 kHz), dB |
+0.03, -0.01
|
Excellent
|
Noise level, dB (A) |
-92.0
|
Very good
|
Dynamic range, dB (A) |
92.1
|
Very good
|
THD, % |
0.0015
|
Excellent
|
THD + Noise, dB (A) |
-85.4
|
Good
|
IMD + Noise, % |
0.0075
|
Excellent
|
Stereo crosstalk, dB |
-91.8
|
Excellent
|
IMD at 10 kHz, % |
0.0076
|
Excellent
|
General performance |
Excellent
|
From 20 Hz to 20 kHz, dB |
-0.06, +0.03
|
From 40 Hz to 15 kHz, dB |
-0.01, +0.03
|
Left
|
Right
|
|
RMS power, dB |
-90.7
|
-90.8
|
RMS power (A-weighted), dB |
-91.9
|
-92.1
|
Peak level, dB FS |
-76.8
|
-76.7
|
DC offset, % |
-0.0
|
-0.0
|
Left
|
Right
|
|
Dynamic range, dB |
+90.8
|
+90.7
|
Dynamic range (A-weighted), dB |
+92.1
|
+92.0
|
DC offset, % |
-0.00
|
-0.00
|
Left
|
Right
|
|
THD, % |
+0.0012
|
+0.0018
|
THD + Noise, % |
+0.0060
|
+0.0061
|
THD + Noise (A-weighted), % |
+0.0053
|
+0.0054
|
Left
|
Right
|
|
IMD + Noise, % |
+0.0074
|
+0.0075
|
IMD + Noise (A-weighted), % |
+0.0064
|
+0.0063
|
Left
|
Right
|
|
Crosstalk at 100 Hz, dB |
-91
|
-90
|
Crosstalk at 1000 Hz, dB |
-90
|
-92
|
Crosstalk at 10000 Hz, dB |
-79
|
-78
|
Left
|
Right
|
|
IMD + Noise at 5000 Hz, |
0.0077
|
0.0076
|
IMD + Noise at 10000 Hz, |
0.0075
|
0.0076
|
IMD + Noise at 15000 Hz, |
0.0074
|
0.0075
|
Il calibratore che avevo ordinato è arrivato!
Ecco il giocattolino, non vedo l’ora di usarlo!
Caratteristiche:
This is a brand new CEM SC-05 industrial sound level meter calibrator. This device is designed to calibrate sound meters with 1/2″ microphone. This calibrator complies with IEC 942 Class 2 standard. Its compact size makes the device very easy to carry and handle. Ideally, the sound meter should be calibrated once a year.
FEATURES
* Dual sound pressure outputs at 94dB and 114dB which can be selected by a switch.
* Operates on a single 9V battery.
* Auto sound off on low battery to ensure accurate performance.
SPECIFICATIONS
* Output sound pressure levels: 114 dB and 94 dB
* Output frequency: 1000Hz +/- 4%
* Reference conditions: temperature at 23 deg C (73 deg F); Air pressure at 1013 mbar; Humidity at 65%RH
* Accuracy: +/- 0.5 dB
* Power: 9V battery
* Compliance: IEC 942 Class2
* Dimensions: 120 (L) x 51 (W) x 43 (H) mm
* Weight: approx. 130g
Nella pagina Hatt TBS verrà pubblicato tutto il materiale di questo nuovo progetto: mini diffusore a 2 vie in bass reflex.
Benvenuti nel mio nuovo Blog!
L’idea è di condividere in questo spazio idee, informazioni, miei progetti e realizzazioni, per gli appassionati costruttori di diffusori acustici di qualità.
Anche se il “taglio” del Blog farà sorridere i progettisti più smaliziati, il linguaggio è semplice ed il fine è quello di aiutare chi si trova per la prima volta ad affrontare questi temi.
Fortunatamente per me è la seconda! 🙂
Apri un sito e guadagna con Altervista - Disclaimer - Segnala abuso - Privacy Policy - Personalizza tracciamento pubblicitario